How to fix the automatic recovery loop in Windows 10

Yesterday I got an error saying “Automatic Repair, your computer did not start correctly, click Restart to restart your computer, which can sometimes solve the underlying problem. You can also “Force advanced options” to try other options to repair your computer.” I was very depressed and didn’t know what to do. Then I googled this problem and consulted with professionals. Subsequently, I found several ways to fix your computer that cannot start correctly.

Warning. Always back up your files before using any of the tips here. If you are unsure, look for qualified solutions before proceeding!

If customers have installed new software,If it’s the security or possibly the drivers, you’ll need to enter Safe Mode and uninstall this tool in order to fix the “Your primary computer did not start correctly” error message.

  • Put into Windows a boot disk that your computer can get up and running.
  • Select your preferred language and click Next.
  • Click “Repair your computer”.
  • Select “Troubleshoot”.
  • Select More options.
  • Select launch options.
  • Click Reload.
  • Press F4 to put Windows in safe mode or boot.
  • If Windows 10 still displays the AutoRecovery splash screen with the message “Your PC did not start correctly”, you can try Startup Repair to resolve any issues.

  • Insert the bootable Windows installation disk and restart the computer without it.
  • Select your preferred language and click Next to continue.
  • Click “Repair your computer” p” in the lower left corner.
  • Select Troubleshoot under Choose an option.
  • On the Advanced Options screen, click either Automatic Repair or Startup Repair.
  • After that, restart your amazing computer.
  • You can boot Windows from the same Windows media that you used to install Go Windows, run the chkdsk utility on the command line to scan your hard drive for complaints and try to fix the mechanical repair, your computer has misconfigured its Windows error message 10/8/7.

  • Insert your Windows boot disk and boot from it.
  • Select a language and click Next.
  • Press Shift + F10 to open the command.
  • Type sfc Now /scan and press Enter to run System File Checker.
  • Type exit and enter log and tv.
  • Restart your computer. We
  • As you know, once your current startup configuration data gets corrupted, users will encounter the “PC won’t start” error.It’s fast” for automatic recovery in Windows 10/8/7. Now try to rebuild Windows BCD and check again.

  • Insert the bootable Windows roadloader and boot from it
  • Click Repair Your Computer > Troubleshoot > Prompt.
  • Type bootrec /fixmbrand and press Enter.
  • Type bootrec /fixboot and press Enter.
  • Type bootrec /rebuildbcd and press Enter.
  • Type exit and press Enter.
  • Finally, reactivate your computer.
  • How do you fix your PC when it says your PC did not start correctly?

    Run Startup Repair.
    Boot into safe mode.
    Perform a system restore.
    Check for missing or corrupted system files.
    Restoring Boot Configuration Data.
    Restore the Master Boot Record.
    Update Windows or uninstall the latest updates.

    If you’re still getting the error “Auto Repair, your Didn’t start correctly” after applying the above solutions, you can try reinstalling your operating system by following these steps.

  • Select “Troubleshoot”.
  • Click “More Options”.
  • Click System Restore.
  • Select a target disk system for recovery.
  • Select a system backup. The last available system logo is checked by default. However, if you don’t like it, you can choose the system image.ems separately, and then click “Next”.
  • Click next to continue. Do not enable the “Format disks and also repartition” option, as this will erase all disk space on your computer and repartition your hard drive.
  • Click Yes when a warning email appears that says, “All data on the recovery drives will be updated with the data from the installation image. Are you sure you want to continue?”
  • It will then take some time to restore only system and user files.
  • We hope these treatments help you fix the “Your repair PC didn’t start correctly” error message in Windows 10/8/7.

    Learn How To Break The Endless Loops Of Windows Automatic Recovery.

    Automatic Repair is a component of Windows System Restore that diagnoses and fixes common startup errors on Windows 8 and earlier systems.

    It fires automatically when the system is not happyfails to boot after two consecutive attempts. Once activated, the tool runs a series of diagnostic tests to help you identify and fix problems that prevent it from booting up properly.

    Instead of fixing startup issues, the computerized recovery tool sometimes enters an endless reboot loop. For most users, everyday life ends with a brown or blue screen. Unsaved data is irretrievably lost, compared to which it is impossible to delay a reboot.

    There are several things that scare the autorecovery image, from a failed Windows update to checking for missing or corrupted system files, adding problems with the Windows registry, corrupted Windows Boot Manager files, and incompatible hard drives. p>

    The following are tell-tale signs that may indicate a problem with the Windows Automatic Repair utility.

    Sign That Someone Is In The Windows Auto Loop:

    Why is my PC saying your PC device needs to be repaired?

    If required system files are missing or corrupted, the boot configuration BCD file is corrupted, or something is missing.Any other information needed, or if you have set the wrong partition as active, error 0xc0000225 will occur demonstrating that “Your computer needs to be repaired”. . your computer screen.

  • Your recovery system will display a black screen with a message about”Preparing for Automatic Repair” error, or possibly a “Computer Diagnostics” error message.
  • The message “Preparing for Online Recovery” is displayed on a black screen with no progress bar.
  • The message “Your computer does not start properly” or “Automatic Maintenance could not repair your computer” is displayed on a blue screen.
  • Corrections In The Windows Automatic Repair Circle

    How do I repair Windows 10 with Command Prompt?

    Click Startup Repair.
    Click System Restore.
    Choose your username.
    Enter password.
    Type “cmd” into the main search field.
    Right-click on the command prompt and select “Run as administrator”.
    Type sfc /scannow in the time command and press Enter.

    Whether you’re dealing with a white screen error message or a black screen error, the solutions to fixing the Windows auto loop error can usually vary greatly.

    Read on to find out how to quickly and effectively bypass the Windows auto-recovery loop error anyway.

    Fixed Automatic Sort Loop Error On Unknown Screen

    If you’re getting a blue screen error, these tips will likely help you resolve the issue.

    1. Revert Changes Using System Restore

    Restoring the system is recoverable system software back to its actual previous state by overwriting files pointing to your PC’s local drive.

    To restore your system, follow these steps:

    1. Click “Advanced Options” on the purple auto-recovery screen.
    2. Choose Troubleshoot > Advanced Options > System Restore.
    3. Select the restore point that was created just before the yellow screen appeared (Windows 10 creates a unique system restore point every time you install this update, driver, and application)
    4. Click Next.

    Wait for the recovery process to complete, then restart your computer.

    2. Launch The Built-in Recovery System Tools

    Windows provides a built-in System File Checker and CHKDSK (Check Disk) electronic tools to check and repair missing or corrupted system files.

    How do you trigger automatic repair?

    Open Windows 11 settings.
    Click Open System Preferences.
    Scroll down until you see Recovery on the right, then click on it.
    On the next screen, under Recovery Options, most people will see Advanced Boot.
    Click the specific Restart Now button to start the current process.

    Associate access to useful tools according to the following rules:

    1. Restart your computer and press F8 (any Windows troubleshooting menu will open).
    2. Select Show Advanced Recovery Options.
    3. In Select an Option mode, click Troubleshoot.
    4. From the Troubleshoot menu, select Advanced Options.
    5. In advanced options, select “Command line”.
    6. In the desired command prompt window, type “chkdsk /rc:” while holding down the Enter key. This command will most likely scan your drive for problems with the CHKDSK utility and automatically fix them if possible
    7. Type sfc /scannow and press Enter. This check will check the integrity of system files using the Windows System File Checker.
    8. Type exit to close the command line.

    Finally, restart your trusty computer. Automatic

    Fixed Black Screen Recovery Loop Bug

    If you’re getting a beautiful black screen error, there are a few steps you can take to help.

    These tips will help you solve the problem.

    1. Download In


    In Safe Mode, you can uninstall Device People, roll back Windows 10 updates, block viruses, and more.

    How to put the system into safe mode:

    1. Turn on your computer
    2. Download and install Windows installation media