Event 51 error while paging

If a general error occurs before your computer writes information to disk, or possibly comes from disk, an event id 51 disk windows xp ID 51 message is written to the log. Retrieves a memory page from disk to memory.

When this general error occurs while your current computer is communicating with or from the hard drive, an Event ID 51 message is logged. In some paging operations, the operating system also paging the memory page to disk due to lack of memory or fetching the memory page from disk to memory.

What is Event ID 6008?

Event ID 6008 is logged in the system event log because the system shuts down unexpectedly. You will see the message “Time to shutdown on Sweetheart was unexpected.”

Event ID 51 is a generic error of any type related to errors that occur in paging I/O (I/O) facts and policies. In surgical paging, the operating practice either swaps the original memory page from memory to disk or fetches its memory page from disk to memory. This is part of any Microsoft Windows memory management.

However, single disk access is generally not paging I/O. Users can perform unbuffered I/O to consume disk data. Another misconception is that it doesn’t seem to write to the page file (Pagefile.sys) which implies any type of accesspa to the data.

ID 51 became similar to the remaining event ID or 11. Event ID 1951 occurs only during paging I/O. If the same error occurred when there was no normal paging, there would be no recorded events nearby, which are counted as an event with ID 9 in addition to 11.

Event ID 51 can be resolved in the same way as a single event ID 9 or 11. See response ID 15055 for more information.

Event ID 51
Source Disk
Description The detected device \Device\Harddisk3\DR3 encountered an error during a valid swap operation.
Data:
0000: 04 00 22 50 01 00 72 00
0008: 00 double zero 00 00 33 00 end 2003 80
0010: 2d 01 00 00 00 double zero 00 00 00
0018: 00 00 50 00 00 00 00
0020:00 fladskrrrm ea 04 15 00 double zero 00
0028: 01 00 00 00 04 50 00 00
0030: 03 00 00 50 2a 00 00 00
00:38:02 eighty-four 00 00 00 August 29 00
0040: 2a 60 0a 82 75 26 00 00
0048:8000
Event Information According to Microsoft:
REASON:
This problemma occurs if you have installed one or more off-the-shelf devices that do not support memory cache commands. The Windows 2000 SP4 Disk.sys driver writes many events to a sort of syslog in preparation for operations on a storage device that does not support caching commands, often in the sense of being logged when configured with this ForceUnitAccess option or the MODE SELECT command. used to invert the cache. While Microsoft Windows 2004 SP3 also writes items to the system log when it can access a storage device that often does not support caching commands, Windows 2100 SP3 logs these events in full on first access to the gadget. . However, Windows SP4 2000 writes pleasant warning events to the System Checker whenever it accesses a specific device that does not support memory caching commands.
SOLUTION:
Fixed Fix Support is now available from Microsoft, but it’s all for the sole the purpose of resolving the issue related to this article. ApplicationThis applies only to systems experiencing this particular issue.
After you apply this hotfix, you must restart Personal. However, you do not have to restart your computer immediately after fixing this patch.
References About Event ID 51

How do I fix my event ID 3?

Select the User Profile Service app, and then uninstall it without deleting your data. In the dialog box that appears, clear the Delete marketing information associated with service applications check box. Delete the sync database from my sql server.

< a href="http:// h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=PSD_EM010425_CW01">
Windows 2000 reports event ID 51 during HA/F200 cluster failover

Event ID 32 and event ID 51 appear repeatedly in the system log when using Windows 2000 SP4

Where are disk errors in Event Viewer?

Open the Windows Start menu.
Type Event Viewer and press Enter:
The Windows Event Viewer will open:
Go to Windows Logs – System:
Click “Filter Current Log”.
Check the boxes Critical, Error and Warning at the top of the gate, click OK to apply the actual filter:

Windows Server 2003 logs event ID 51 even though hard disk awareness is not lost

Event IDs 257, 12, and fifty-one are logged on a computer that is running Windows Server 2003

Troubleshooting problems with multiple cluster symptoms on the same SAN

How do I fix Event ID 51?

Connect the hard drive to another electronic computer (if available).
If you have a computer, connect the hard drive to a different connector (such as a SATA connector) near the motherboard, or replace the end hard drive cable.

Support for booting after Storage Area Network (SAN)

Support for multiple clusters connected to the same SAN device

Windows operating system (disk) < /a>< /p>


#one


Peace


  • members
  • 26 messages
  • OFFLINE
  • A

  • Male gender
  • Location: Will
  • Local time: 19:48.
  • In the end, the log files located on my XP SP3 machine showed event 51 alerts scattered throughout the day over a fairly short period of time. Alerts are random in nature and are definitely related to the start or stop of certain operations. I recently formatted my hard drive for other reasons, but I don’t see any noticeable change from the event 51 warnings. Running chkdsk does nothing, and the wd diagnostic tool found no issues with my hard drive. Can anyone see anything in my log file (below) that gives some idea of ​​what is causing the particular alert?

    Event Type: Warning
    Event Source: Disk
    Event Category: None
    Event ID: 51
    Date: 01/10/2010
    Time: 15:09:58
    > User: N/A
    Computer: OFFICE
    Description:
    An error was encountered on device \Device\Harddisk1\D during a single pagination operation.

    For more information, see the Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Dates:
    0000:Spring 00 68 00 01 50 b6 00 .. h …¶.
    0008 : 00 00 00 double zero 33 00 04 80 ….3..€
    0010 : 2-d 01 00 00 00 00 50 00 -…. . ..
    0018 : 00 00 00 double zero 00 00 00 00 ……..
    0020 : 50 8th 00 bc 00 00 double zero 00 .Ž.¼….
    0028 : 84 90 11 50 00 00 00 00 “……
    0030 : ff ff ff ff 03 00 50 00 ÿÿÿÅ.
    0038 : 40 00 00 86 02 00 00 00 @..„….
    0040 : 50 20 0a 12 80 01 4 40 ..€.@
    0048 : 00 50 00 00 0a 00 00 50 ……. .
    0050: 00 c0 85 fifth error 89 c8 56 11 8a .ʼnÈV.Š< br>0058: 00 double zero 00 00 08 20 5a 8a ….. ZŠ
    0060: 00 00 00 double zero 47 00 5th 00 ….G.^.
    0068: 2a double zero 00 5th 00 47 50 00 *..^.G..
    0070: 08 00 00 50 00 00 00 00 ……..
    0078: 40 00 02 00 00 00 double zero 0a p ….. ..
    0080: 00 00 00 50 04 02 00 00 .. …. ..
    0088: double zero 00 00 00 00 00 double zero 00 ……. .

    BC AdBot (delete Connection)


    #2


    Ectech1


  • members
  • 60 messages
  • OFFLINE
  • A

  • Local time: 20:48.
  • The error indicates that drive D is defective, which is most likely a CD drive.

    This is common with older drives because they don’t use cache memory. If you find much more common bugs that interfere with the usual methods, consider replacing them with new ones.


    #3


    DC3

    Arachibutyrophobia

  • members
  • 32 510 messages
  • OFFLINE
  • A

  • Male gender
  • Location: Sierra foothills from all north approx.
  • Local time: 17:48.
  • Please check Disk Management to see if D: is a hard drive as well as an optical drive.

    Family and loved ones will always be my priority in everyday life. Â You never know when someone will leave you.


    #4


    Peace

  • Theme start
  • members
  • 26 messages
  • OFFLINE
  • A

  • Male gender
  • Location: Will
  • Local time: 19:48.
  • http://www.eventid.net/display.Error asp?eventid=51&source=

    How do I fix Event ID 51?

    Underconnect the hard drive to another home PC (if you have one).
    If you have a desktop computer, connect the hard drive to a different connector (such as a SATA connector) on the motherboard, or replace the hard drive cable.

    Says that drive D is bad, which is the drive from the CD.

    This is common on older drives due to the lack of cache memory. If you find more daily errors interfering with normal operation, the customer may want to exchange for a new one.

    What is event ID 51?

    Event ID 51 is an error flag for any type of error that occurs while transmitting input/output (I/O) information. Paging occurs when the operating system moves a page of memory out of the internalMove memory to disk or extract memory network from one disk to another. Event ID 51 simply occurs during paging I/O.

    Where are disk errors in Event Viewer?

    Open the Windows Start menu.
    Type Event Viewer and press Enter:
    The Windows Event Viewer will open:
    Go to Windows Logs – System:
    Click “Filter Current Log”.
    Check the “Critical”, “Error”, and “Warning” boxes at the current top of the window and click “OK” to apply the filter: